Getting torn down next week to build a squishy bike so here she is for posterity
Last edited by: boomforeal on March 18, 2023, 8:17 a.m., edited 1 time in total.
Getting torn down next week to build a squishy bike so here she is for posterity
Posted by: boomforeal
Getting torn down next week to build a squishy bike so here she is for posterity
Got enough spares for a SS rigid experiment? It's traditional by now.
Posted by: boomforeal
Getting torn down next week to build a squishy bike so here she is for posterity
My Doctahawk met the same fate for now at least.
Posted by: mrbrett
Posted by: boomforeal
Getting torn down next week to build a squishy bike so here she is for posterity
My Doctahawk met the same fate for now at least.
As the Swedes say you're "swearing in the church" right now, the Hardtail Gods will be very unpleased ;)
Posted by: boomforeal
Getting torn down next week to build a squishy bike so here she is for posterity
Dang, that thing cuts a sweet profile. Want.
So I had a wolftooth geoshift -2 installed in my og rootdown.
Game changer. Min maxing. No negatives for me.
Posted by: tashi
Posted by: boomforeal
Getting torn down next week to build a squishy bike so here she is for posterity
Dang, that thing cuts a sweet profile. Want.
Shwing
The trails around here are finally starting to dry out, so I'm taking the Stooge out for some more Stoogin'. Turned a downed tree into a feature with a few minutes' work, and found out that I need a bash guard if I'm going to be doing dumb stuff on this bike.
I confess I am tempted to swap her over to flat bars. Not that I feel the drops are holding me back, but that it would rip even harder on flats. I think it would be about $200 - shifter, brake levers, bars, grips, maybe a new stem.
Posted by: TristanC
The trails around here are finally starting to dry out, so I'm taking the Stooge out for some more Stoogin'. Turned a downed tree into a feature with a few minutes' work, and found out that I need a bash guard if I'm going to be doing dumb stuff on this bike.
I confess I am tempted to swap her over to flat bars. Not that I feel the drops are holding me back, but that it would rip even harder on flats. I think it would be about $200 - shifter, brake levers, bars, grips, maybe a new stem.
The flat bar thing sounds good. Putting drops on my Krampus makes it feel like a new bike therefore it's going to be same going the other way.
PS that looks like a lovely bit of trail.
that is a sweet bit of trail
Posted by: velocipedestrian
Got enough spares for a SS rigid experiment? It's traditional by now.
Well, it does have sliders. But the bb is pretty low; I’d need a rigid fork with a ~540mm a2c
Posted by: boomforeal
Posted by: velocipedestrian
Got enough spares for a SS rigid experiment? It's traditional by now.
Well, it does have sliders. But the bb is pretty low; I’d need a rigid fork with a ~540mm a2c
Or shorter cranks?
Posted by: velocipedestrian
Posted by: boomforeal
Posted by: velocipedestrian
Got enough spares for a SS rigid experiment? It's traditional by now.
Well, it does have sliders. But the bb is pretty low; I’d need a rigid fork with a ~540mm a2c
Or shorter cranks?
I've looked into this a bit, Waltworks seems like the only option I've found. Gets expensive quick and makes more sense to find a used fox 36/lyrik/etc. instead.
Using a 510/500 a2c rigid fork on the honzo has the more unfortunate effect of steepening the seat angle into close to unrideable territory on anything except straight up and down.
Posted by: Flatted-again
Posted by: velocipedestrian
Posted by: boomforeal
Posted by: velocipedestrian
Got enough spares for a SS rigid experiment? It's traditional by now.
Well, it does have sliders. But the bb is pretty low; I’d need a rigid fork with a ~540mm a2c
Or shorter cranks?
I've looked into this a bit, Waltworks seems like the only option I've found. Gets expensive quick and makes more sense to find a used fox 36/lyrik/etc. instead.
Using a 510/500 a2c rigid fork on the honzo has the more unfortunate effect of steepening the seat angle into close to unrideable territory on anything except straight up and down.
Here's an extra 10mm:
https://www.wolftoothcomponents.com/products/wolf-tooth-lower-headset-cup-extender-zs-zero-stack
Posted by: Tremeer023
Posted by: Flatted-again
Posted by: velocipedestrian
Posted by: boomforeal
Posted by: velocipedestrian
Got enough spares for a SS rigid experiment? It's traditional by now.
Well, it does have sliders. But the bb is pretty low; I’d need a rigid fork with a ~540mm a2c
Or shorter cranks?
I've looked into this a bit, Waltworks seems like the only option I've found. Gets expensive quick and makes more sense to find a used fox 36/lyrik/etc. instead.
Using a 510/500 a2c rigid fork on the honzo has the more unfortunate effect of steepening the seat angle into close to unrideable territory on anything except straight up and down.
Here's an extra 10mm:
https://www.wolftoothcomponents.com/products/wolf-tooth-lower-headset-cup-extender-zs-zero-stack
Stack four of those and a whisky LT fork and boom! 540 a2c!
Forum jump: