Here is a more techy question….
I have a 2004 Norco Shore… complete with upside down Norco decal under the clear coat.
I am guessing because of the linkage, they run the cables through housing all the way from the shifter to the derailer. I try and not ride when it is wet… but that is pretty hard out here.
What can I put in the cable housing so that the lines don't get all gummed up with crap… or not shift properly because they are binding on the housing?
I have used road lube as it is quite liquidly and it flows better…but one rain… and it is done.
Any suggestions?
Thanks Lou!
Tell Grant I said… WWWWWWWWWWWWWHHHHHHHHHHHHAAAAAAAAAAT!
Thanks!
Dan