New posts

Dynafit brake repair

Nov. 30, 2016, 10:37 p.m.
Posts: 14408
Joined: Nov. 20, 2002

I can't tell any thing from the pict

Are you are saying one heel piece is different than the other?

It is common for Rad1 heelpieces to blow up so it would not suprise me if one heel piece had broken so it was replaced with a newer model and is therefore different, when my Rads blew up they gave me a different heelpiece so I now have one ST and one FT heelpiece

Nov. 30, 2016, 11:28 p.m.
Posts: 0
Joined: Aug. 4, 2003

Attached is a picture. Looking at the other one it looks like it went all the way around but it didn't break as it's too symmetrical.

So my guess is first gen. Does that look correct?

This has been awesome guys. Thanx so much!

Yup, that us the 1st Gen, you just need the retention clip, all should be good. Like I said, it can be installed without removing the binding, or an of the binding parts. It's not easy to get on, takes some manipulation and a little force.

Nov. 30, 2016, 11:36 p.m.
Posts: 0
Joined: Aug. 4, 2003

Tonestar, do you happen to know binding setback numbers for 2014 Line Sir Francis Bacons?

Are you talking about the recommended mounting point from Line? Or something else?

Don't have the information off hand, but can make an enquiry.

Dec. 1, 2016, 1:18 a.m.
Posts: 11
Joined: Nov. 20, 2005

yep. retainer clip is missing for the brakes… that said…. the brake is also supposed to clip the post a bit. That part is either worn or bent. Tonestar has the clip you'll need… but you might also need to do a little bending.

Dec. 1, 2016, 1:38 a.m.
Posts: 15019
Joined: April 5, 2007

Are you talking about the recommended mounting point from Line? Or something else?

Don't have the information off hand, but can make an enquiry.

Yeah that's what I'm after. Appears to be difficult info to acquire

Why slag free swag?:rolleyes:

ummm, as your doctor i recommend against riding with a scaphoid fracture.

Dec. 1, 2016, 6:54 a.m.
Posts: 11
Joined: Nov. 20, 2005

on a set of 190s.

http://www.epicski.com/t/124228/sir-francis-bacon-mr-pollards-opus-mounting-lines-big-screw-up#post_1668585

seemingly from -2 to -8 from true center depending what you want. Scale down for smaller ski.

Dec. 1, 2016, 7:44 p.m.
Posts: 0
Joined: Aug. 4, 2003

Yeah that's what I'm after. Appears to be difficult info to acquire

What length?

Dec. 1, 2016, 8:18 p.m.
Posts: 15019
Joined: April 5, 2007

What length?

178cm

MY 2012 108mm underfoot models.

I'm reading the links posted and I can't figure out what Line screwed up with. As far as I recall my skis only have a midsole boot mark on it.

Why slag free swag?:rolleyes:

ummm, as your doctor i recommend against riding with a scaphoid fracture.

Dec. 1, 2016, 11:49 p.m.
Posts: 0
Joined: Aug. 4, 2003

178cm

MY 2012 108mm underfoot models.

I'm reading the links posted and I can't figure out what Line screwed up with. As far as I recall my skis only have a midsole boot mark on it.

Sorry, don't know anything about the screw up from Line, I could only reference midsole mark from skis in the shop, so it would be the same as yours I guess. I will ask one of the guys who works at a shop that sells Line, see if he knows anything.

Dec. 2, 2016, 12:05 a.m.
Posts: 15019
Joined: April 5, 2007

Sorry, don't know anything about the screw up from Line, I could only reference midsole mark from skis in the shop, so it would be the same as yours I guess. I will ask one of the guys who works at a shop that sells Line, see if he knows anything.

Okay. Thanks.

Figuring out how far back from the midsole mark is what I'm after.

Sorry for the thread jack.

Why slag free swag?:rolleyes:

ummm, as your doctor i recommend against riding with a scaphoid fracture.

Dec. 2, 2016, 11:56 a.m.
Posts: 1133
Joined: Nov. 21, 2002

PM'd you tonestar

Dec. 2, 2016, 2:11 p.m.
Posts: 0
Joined: Aug. 4, 2003

Okay. Thanks.

Figuring out how far back from the midsole mark is what I'm after.

Sorry for the thread jack.

-3cm from the midsole mark that is on the ski (that is Pollards mark).

Forum jump: