Are you fitting bigger tires, cus your not gonna gain much usefull clearance unless you up size your tires. You'd be better off buying rock sliders.
truck suspension shop?
Are you fitting bigger tires, cus your not gonna gain much usefull clearance unless you up size your tires. You'd be better off buying rock sliders.
I got 30's on there now, I'd like 33's
.
.
.
.
"i surf because, i"m always a better person when i come in"-Andy Irons
.
.
.
If your frontier is an 02 none of the PRG stuff will work on it,
it's all made for the new frontiers (05 and up).
the rancho kit is okay, but if you want a good lift kit for your frontier check out these guys; www.4x4parts.com
that's where i get almost all my frontier stuff from
A rat is just a squirrel with street cred
and if you want 33's you'll have to do at least a 2" body lift as well
A rat is just a squirrel with street cred
a lowered Astro has panache
An Astro/Safari is not a 'Mini-van'.
But I guess I'm correcting Zed, not you;)
Hug a logger, you'll never go back to trees
An Astro/Safari is not a 'Mini-van'.
But I guess I'm correcting Zed, not you;)
Its pretty much a chevy blazer.
yup. you want a spacer lift - around $300. you want coilovers and new upper control arms with rear leaves you're looking at $2000. plus install. prices in cdn.
here is one of the best companies for frontier suspension - i ordered from here and had dale's install some of it www.prgproducts.com
if i ever lift my x im going prg.
Jesus…..Here's a better answer.
:lol:
I got 30's on there now, I'd like 33's
go to www.shrockworks.com if you want sliders for your truck
Why slag free swag?:rolleyes:
ummm, as your doctor i recommend against riding with a scaphoid fracture.
Calmini does Frontier lifts. If you were doing the work yourself id say just re-index and crank the torsions, longer shackles in the rear and get it aligned.
Fuck just throw the 33s on chris who cares about a bit of fender rub it will look cooler with less lift
Posted via Mobile Device
Ha Ha! Made you look.
Fuck just throw the 33s on chris who cares about a bit of fender rub it will look cooler with less lift
Posted via Mobile Device
If its horrible get a small body lift and do a little trimming, lift doesn't always = tire clearance anyway, depends on the shape of the wheel well. The clearance issues are usually at the firewall/ inner fender/front bumper anyway.
go to www.shrockworks.com if you want sliders for your truck
I wish I would have seen this before I spent $200 on my hitch…for $425 I could
have had a new bumper (which is rusty as hell from all the shuttles I've done).
And it has a integrated class 3 hitch.
http://www.shrockworks.com/Nissan-Frontier-Rear-Bumper-pr-16245.html
Fuck just throw the 33s on chris who cares about a bit of fender rub it will look cooler with less lift
Posted via Mobile Device
I care about rub, tires ain't cheap.
If its horrible get a small body lift and do a little trimming, lift doesn't always = tire clearance anyway, depends on the shape of the wheel well. The clearance issues are usually at the firewall/ inner fender/front bumper anyway.
A 3-4" lift for my '02 Frontier will handle 33" X (I think 10") without any issues, just
got to turn in the end stops a bit. With coil overs I should have very little negative
affect in my handling too. I've known a couple guys on Kauai that did 3 and 4" lifts.
After that, I think a cold air and catbac dual exhaust system is in order.
.
.
.
.
"i surf because, i"m always a better person when i come in"-Andy Irons
.
.
.
Not sure id add Coil overs to a Torsion sprung truck, some fancy shock absorbers would do the trick.
Not sure id add Coil overs to a Torsion sprung truck, some fancy shock absorbers would do the trick.
The gen 1 Frontiers have a bit of a lack of spring in the front, so it makes any shock
you put up there work that much harder. I haven't been going off road here too much
and the roads are pretty nice, but driving on the sand (at speed), on the mountain
and the crappy roads on Kauai took out quite a few shocks. At least that's what
I've read and from my experience with this truck over the last 8 years. But if I go
this route, I'm sure they'll be fancy coil overs. 8)
I'm one of those guys that needs to know how much "everything" is going to cost
and then I'll save it and do the deed.
.
.
.
.
"i surf because, i"m always a better person when i come in"-Andy Irons
.
.
.
Its pretty much a chevy blazer.
If the Blazers are rated to tow 5500lbs…then yes, you could include them with the Astro and 1/2ton trucks.
Forum jump: