Ah so that's the term. Yeah, IMO it doesn't look terrible (definitely looks clean) but it feels awful, like pre-sanded wood almost.
Sand it?
Ah so that's the term. Yeah, IMO it doesn't look terrible (definitely looks clean) but it feels awful, like pre-sanded wood almost.
Sand it?
Sand it?
It's the rounded variety… you could sand the tops in place, but you would have to lift every board to sand and varnish it again properly. It's getting on in age and not worth that kind of time and money considering the number of years left before it will need to be replaced. In any case, it's at my parents' place not mine, and they're content enough with it for now.
This space intentionally left blank.
Actually the term is popping the grain. Just give it a quick sand by hand after its dry.
diggin
Actually the term is popping the grain. Just give it a quick sand by hand after its dry.
Ahhhhhh sheeet, term war!
Either way your best bet is to give it a rinse with a pressure washer, clean off the most dirt and loose paint with that, get some sandpaper and go to town on the rest of it. If its really 10 years old, it has already outlived its expectancy. Decking boards dont last long.
Also, if it is square edge and you have a few more hours of time, and really want to make it look good you can rent an edger and refinish it properly.
If its really 10 years old, it has already outlived its expectancy. Decking boards dont last long.
How long should I expect out of a deck?
How long should I expect out of a deck?
It depends on the material and use of the deck, and how much you really care about the appearance. To some ruined, means well used. But on average 10 years on the high side for any material. 5/4 material will cup and crack after 5. 2 by cedar will last longer since it can be refinished and its thicker, but even cedar unless you take good care of it will look used after a few years.
It also depends on many factors, weather exposure, material used, and foot traffic to name a few.
So I look to NSMB to solve yet another of life's nagging questions. Is it okay to use a power washer on a wood deck.
Rent a powerwasher, but be careful it seems. Go here:
http://www.doityourself.com/stry/cleandecktips
Looks like still lots of work. I might be bribed to help with promises of beer and BBQ though…
D
when we powerwashed out deck it was old enough that it ripped the wood to shreds so be careful.
As a professional in the industry, I would recommend pressure washing it, then have one week or more of your typical dry summer weather to let it relieve of all moisture. Sand with a decent palm sander and a good mask for your lungs. About 3 hours or so and your deck should look fresh again (assuming no rotting has occured yet).
From here, you can vacuum it, or just hose it lightly, let dry for two days. Use Sikkens deck natural wood finish (tone is up to your preference). Apply single coat with a brush and a rag to chase it to relieve any lap marks. Let dry for a day, apply second coat, repeat procedure. Step back, crack a beer and go pat yourself in the back. You just saved about 700 dollars worth of work.
PS: TSP is your best friend when it comes to removing the dirt out of the pores in the wood grain. Make sure you use it, then clean it thoroughly before re applying stain as it tends to mess up the chemical consistency of the paint/stain (from past experiences) and they are also nutrients for algae.
oh hai!
Ahhhhhh sheeet, term war!
Either way your best bet is to give it a rinse with a pressure washer, clean off the most dirt and loose paint with that, get some sandpaper and go to town on the rest of it. …
thats what i would do..just watch the psi on your washer…if u r renting one tell buddie what its for..you want a machine w less than 2500 psi, or u can really screw things up.
personally i dont like stains and have noticed many of my clients with waterfront pads moving away from stains and just letting the wood age naturally..stains look good very briefly, they really just attract more dirt.ultimately they are way more maintenance.
Ask the one and only majin he comes from a long line of deck builders
thats what i would do..just watch the psi on your washer…if u r renting one tell buddie what its for..you want a machine w less than 2500 psi, or u can really screw things up.
personally i dont like stains and have noticed many of my clients with waterfront pads moving away from stains and just letting the wood age naturally..stains look good very briefly, they really just attract more dirt.ultimately they are way more maintenance.
Yes, I realized that the darker tones tend to make it look AMAZING for about a week, then dirt gets on, and you see the dirt ALL the time. Kind of like a black car, you'll never get it gleaming spot-free 24/7.
I prefer the natural finish stain in 2 coats. It has enough pigments and penetration to protect the wood from most UV rays and dirt, and yet looks natural enough for those that are looking for easy maintenance.
oh hai!
Ask the one and only majin he comes from a long line of deck builders
I don't get it?
Oh I get it now. I'm suprised people still remember that.
As a professional in the industry, I.
I would be interested in hearing what you think about these plastic (other?) alternatives to wood? I know that they can be pretty pricey but do they pay for themselves through reduced maintenance and longer life?
Thanks
Please let me demonstrate the ride around; really it's no trouble.
I don't get it?
Oh I get it now. I'm suprised people still remember that.
I just remembered :lol:.
This space intentionally left blank.
Forum jump: