Posted by: Universe
https://forums.mtbr.com/components/oneup-dropper-v2-1101344.html#post14279747
Got to love that the fix is electric tape... They admit that they install electric tape from the factory to solve the rattle...
Oneup dropper making knocking sound
SlipshodÂ
1 - Remove the post from your bike and put it in a mid travel position.
2 - Remove your Seat, Clamps (1-4), and Valve Cover (5).
3 - Unscrew Cartridge Lockring (6) using a pair of needle-nose pliers.
4 - Unscrew Actuator (16) using either a 17mm wrench (V2) or a 14mm wrench (V2.1)
5 - Slide Cartridge (14) out of Upper Tube (7) while it is still attached to Actuator (16)
6 - Apply two wraps of electrical tape to the main body of Cartridge (14) 40mm from the end.
OneUp Dropper V2-image.jpg
7 - Reinstall Cartridge (14) into Upper Tube (7) - It should now be a snug fit.
8 - Screw Actuator (16) back into Lower Tube (12)
9 - Activate Actuator (16) to fully extend the post
10 - Reinstall Cartridge Lockring (6) using a pair of needle-nose pliers.
11 - Reinstall Valve Cover (5).
12 - Reinstall your Post, Seat and Clamps (1-4).
Jon @ OneUp
Forum jump:
