Full Spec.
Fork - Fox 34 Float 150mmCTD ADJUST FIT
Head Set - Cane Creek "forty" series
Stem - Thomson Elite X4 70mm
Bar - Joystick Analog Carbon
Grips (pair) - Lizard Skins Knolly Charger
Brakes - Shimano XTR Trail 180/160
Shifters - Shimano XTR 2 x 10 spd
Seat Post - Thomson 31.6mm
Seat Post QR - Chromag Aluminum
Saddle - Joystick Emulator
Crankset - Shimano XTR Trail 2 x 10, 175 x 26 / 38 T
Front Derailleur - Shimano XTR E-type 2 direct
Rear Derailleur - Shimano XTR 10 spd
Cassette - Shimano XTR 11 - 36 T
Chain - Shimano 10 spd
Front Hub - Hope Pro II EVO 15mm
Rear Hub - Hope Pro II EVO 12x142
Spokes - DT Swiss Competition Black
Rims - DT Swiss XM480
Front Tire - Maxxis Minion DHF 2.35
Rear Tire - Maxxis Minion DHR 2.35
Tubes - Welter Weight Presta
I'm considering a few changes for sure to this but parts come and go. I'm really looking forward to every single XTR part on this bike, even the cassette is so nice!
Things I might change/ add:
-KS Lev seatpost. Should be here in a couple of weeks!
-Bars, the joystick stuff is strong and light but just not wide enough for my size.
-I love the feel of the fox 34 and 36 forks when on trials not too steep like a lot of ssc, squamish, lower mountain stuff on fromme/ seymour as it does have a tendency to dive on sustained steep stuff. I've found in the past that I either sacrifice small bump or firmness to get the fork set up to handle one scenario better. This is especially true as I like to ride aggressively over the bars, but I have ridden one of the new Endorphins with a 34 float before and riding it more like a trail bike instead of my DH bike also helped it to work very well. I'll probably ride it for a bit and see if James can tune it up or I will grab a Revelation and loose up to .5 lbs while I'm at it.
-I have one of those c-guides. I'm going to put velcro on the chain contact points but if I hear noise, the guide is going on.
-1x10 for the heck of it?