About 8 months ago I laced up a new DT Swiss EX511 rim to a used 350 classic rear hub. I then had the bike shop dish and tension it. I have had it trued a few times now and at different shops and it still makes spoke noises while I ride. According to both shops it is laced in the correct 3 cross pattern. I used the nipple washers. So why is my wheel making noise while I ride?
The craziest part is I just laced up a new XM481 to a used 350 classic front hub and it's making the same noises!!!!! FML
Both built with DT Swiss brass nipples and normal single butt spokes.
Last edited by: heathen on Sept. 1, 2021, 3:07 p.m., edited 2 times in total.