New posts

Minion EXO TR Stans seepage

Feb. 27, 2016, 3:10 p.m.
Posts: 0
Joined: May 31, 2008

I noticed today that my Minion DHF EXO 3C TR rear tire has small spots of stans all over the sidewall. I wiped it down and sure enough the spots reappear confirming that the sealant is coming through the sidewall. I can't find any spots on the tread area and nothing appears to be coming from the bead. The tire has just under 300 km on it! It doesn't seem to have lost pressure. Is this normal for these tires? Anything I need (can) to do to stop it? Front is fine, so I suspect is has something to do with all the flexing the rear goes through on the hardtail has caused micro holes in the sidewall.

Feb. 27, 2016, 3:55 p.m.
Posts: 5
Joined: July 23, 2006

Exact same thing with mine. Doesn't appear to affect the performance though

www.FVMBA.com

Feb. 27, 2016, 4:20 p.m.
Posts: 623
Joined: Sept. 7, 2011

strange my tr ex 3c's have not done this..

Feb. 27, 2016, 5:05 p.m.
Posts: 966
Joined: Feb. 28, 2014

That usually goes away after the first ride. Weird.

Feb. 27, 2016, 5:08 p.m.
Posts: 2024
Joined: May 2, 2004

I've seen a few tires do it. I don't think it matters. It did it on my front tire when new but stopped eventually never noticed any issues.

Although my picky buddy bought a new tire to swap out, paranoid of losing air haha.

Feb. 27, 2016, 5:11 p.m.
Posts: 0
Joined: May 31, 2008

I never had any leakage when it was set up new. I refreshed the sealant at the end of Decemeber, but I'll probably add another 50 ml prior to the next ride and see what happens. All the seepage is approximately equidistant from the rim, so I suspect it is indeed from running low pressure which compresses the tire at this point. It's just hard for my OCD tendencies to see this lol

Feb. 27, 2016, 9:18 p.m.
Posts: 2121
Joined: Nov. 6, 2005

Sidewalls also get abraded over time which leads to more seepageā€¦

Feb. 28, 2016, 7:46 a.m.
Posts: 623
Joined: Sept. 7, 2011

Last night I installed some fresh tires on my wtb i23 frequency rims. I put dhr2 tr exo 3c rear and dhf 2.3 tr exo 3c front. Zero seepage through the side walls. I rolled them around horizontally for a few minutes on both side before installling on my bike.
On a side not they look skinnier than the ones i took off. They must stretch a fair bit after inflating??
Is that a thing?

Feb. 28, 2016, 8:07 a.m.
Posts: 5738
Joined: May 28, 2005

On a side not they look skinnier than the ones i took off. They must stretch a fair bit after inflating??
Is that a thing?

yup

"Nobody really gives a shit that you don't like the thing that you have no firsthand experience with." Dave

Feb. 28, 2016, 9:07 a.m.
Posts: 623
Joined: Sept. 7, 2011

yup

i thought i was imagining it, thanks. On the up side the maxxis TR tires are so easy to mount tubeless on the wtb frequency rims it took my 15 mins to do front and rear.

Feb. 28, 2016, 9:14 a.m.
Posts: 28
Joined: July 20, 2015

I've got some DHF EXO blah blahs on my bike. Front is fine. Rear always seeps from the sidewalls and it's done it since new. Adding more Stan's doesn't make a difference. I blamed the dog at first because it looked like he'd been peeing on my bike wheel.

It holds air, rides fine, looks janky, in that order.

Feb. 28, 2016, 9:24 a.m.
Posts: 0
Joined: May 31, 2008

This is what it looks like right now. Some new very tiny spots. Pressure feels the same.

Feb. 28, 2016, 7:46 p.m.
Posts: 105
Joined: June 21, 2009

This has been happening on my last few maxxis tires, both EXO and DH casings

Forum jump: