DIY Bearing Removal Kit

I'm having a mental block on this - call it analysis paralysis. Show me (or please provide a simple parts list) of a DIY bearing kit for pivot bearings. 

Option #1 - two sockets on either end of the part and press together with a C-clamp and close one into the cavity of the other. Press back in using the old bearing to match

Option #2 - threaded rod (or carriage bolt) with a handful of washers....here's where I struggle. I'm doing 6801 bearings, so 21mm diameter (5mm inner). Do I use a 1/4 or 5/16 bolt with a 3/4" or 5/8" washer set? or does it matter? Do I get bigger ones to go on top of sockets? I'm feeling like I could sort this out at Rona for <$10...but I keep spinning on what to get. 

Option #3 - stop being stupid and just buy the kit: https://www.bocabearings.com/products/bike-but-001-bearing-installer-18438

I'm very happy I bought a bearing press early on.

I'm sad I bought the RRP one, and bought the inserts piece-meal.

I wish I bought a bigger one with every set imaginable.

What do you guys think of this one?

https://www.aliexpress.com/item/4000718181570.html?spm=a2g0o.productlist.0.0.3c7015ebwJYsyb&algo_pvid=e4ca3441-c7b7-415d-9022-e4b8d2dbebab&algo_expid=e4ca3441-c7b7-415d-9022-e4b8d2dbebab-1&btsid=0bb0622916037578663206529e6b62&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

For the price I'd say it's worth a shot...

a friend ordered that one, will see how it goes.

Wheels mfg kit is great, but $

Posted by: Kevin26

a friend ordered that one, will see how it goes.

Wheels mfg kit is great, but $

Please let me know the scoop when your friend gets it!!

Yeah that's one of those things that could be a hidden Ali gem. Please do let us know how it is because I've wanted a press for a while.

Just get the kit from bearing pro tools and if you want, a nicer threaded rod from wheel mf which is much cheaper than a full kit

https://www.bearingprotools.com/

https://wheelsmfg.com/presses-tools/presses-extractors/economy-bearing-press.html

I pulled and replaced all the bearings in my Process at every 6 months and it's trivial with this setup. I mean, the bearings themselves became the expensive thing.

Anyone get one of these yet? Think I'll take a punt on it.