I'm running a chris king iso 135mm bolt on ss drive shell + funn bolts noticed some play a couple weeks after having it built up at dizzy cycles.
I took my rotor off adjusted the preload finger tight retightened the bolt.
Now I can't get the drive side funn! bolt to back out
everytime I turn it and hold the non drive side to stop it from moving the axle just spins and makes the non drive side funn bolt back out.. tried to make it do the same thing for the drive side which worked a little bit but it got stuck and started making the non drive side funn bolt back out again.. No idea wth is going on looked in the manual nothing of help I tried loosening the preload and it's still seized up
anyone know how to fix this issue so I can get a ride in? thanks.
:rolleyes: Less bitchin' more ridin', eh! :smokey: