New posts

chain device for a BANSHEE SCREAM

Feb. 20, 2004, 8:14 a.m.
kong
Posts: 39
Joined: Oct. 25, 2003

do any of u have any ideas as what chain device i should get for my banshee scream???????????????????…………………………….

~*UK***~

Feb. 20, 2004, 8:56 a.m.
_TAZ_SIMPSON_
Posts: 430
Joined: Feb. 10, 2004

eNVy chain gang.

www.envygear.com


:smokey::canada:KICKS ASS

Feb. 20, 2004, 9:03 a.m.
Rusty
Posts: 0
Joined: Nov. 20, 2002

MRP comes to my mind first. The eNVy previously posted looks real nice too. Be a little cautious of using an E13 guide as the ISCG mount on the Banshee is canted forward and the guide may not line up.

drifting…yet again…

Feb. 20, 2004, 10:03 a.m.
seand
Posts: 9009
Joined: Nov. 23, 2002

pat - wbc - had an e13 on his scream if i recall…so e13 is also an option.

dear DW,
since you got like a million bucks now, can i borrow $2850 for a Revolt frame?

thanks,
steve

Feb. 20, 2004, 10:23 a.m.
frizanko
Posts: 55
Joined: Jan. 8, 2004

I run two rings with the Blackspire Dewlie on mine… I havent had any major issues. The granny ring deffinately helps on the long spins up hill.

Feb. 20, 2004, 11:07 a.m.
How
Posts: 883
Joined: Nov. 19, 2002

I have an Evil on mine, takes a little grinding but it works out pretty good I like the guide a lot.

Banshee Bikes

Disobey

Feb. 20, 2004, 12:35 p.m.
falcon171
Posts: 584
Joined: Oct. 31, 2003

I have an e.thirteen SRS chainguide on my 03 Scream. Fits just perfectly

Feb. 21, 2004, 9:14 p.m.
Monster-Mike
Posts: 636
Joined: Nov. 21, 2002

Evil.

Feb. 21, 2004, 9:29 p.m.
Nelson
Posts: 12390
Joined: Nov. 22, 2002

What he said.

Feb. 22, 2004, 2:54 a.m.
WBC
Posts: 0
Joined: Nov. 19, 2002

I could not get my ns-1 to fit, so I ordered an evil.

mounted fine on the frame.

SOR

Feb. 22, 2004, 7:12 a.m.
Runge
Posts: 137
Joined: Nov. 21, 2002

Originally posted by Rusty
MRP comes to my mind first. The eNVy previously posted looks real nice too. Be a little cautious of using an E13 guide as the ISCG mount on the Banshee is canted forward and the guide may not line up.

wouldn't u be able to just not use the ISCG mounts on the frame and use the bb adaptor?

Im in this sitruation with the ISCG mounts where overroated 10degrees.

Feb. 22, 2004, 9:46 a.m.
Rusty
Posts: 0
Joined: Nov. 20, 2002

Runge, I am not sure. From my experince with an E13 DRS guide the machined cut out on the backplate for the ISCG tabs was the biggest issue with mounting. The cut out would not allow the guide to rotate to the correct angle to even conisder a bottom bracket mount.

The E13 SRS may use a different backplate or has another backplate available.

drifting…yet again…

Feb. 22, 2004, 10:27 a.m.
Runge
Posts: 137
Joined: Nov. 21, 2002

Originally posted by Rusty
**Runge, I am not sure. From my experince with an E13 DRS guide the machined cut out on the backplate for the ISCG tabs was the biggest issue with mounting. The cut out would not allow the guide to rotate to the correct angle to even conisder a bottom bracket mount.

The E13 SRS may use a different backplate or has another backplate available. **

yeah. Im interested in the SRS version.

Does anyone know for sure if it will work without using the iscg tabs on the frame

Feb. 22, 2004, 1:43 p.m.
kong
Posts: 39
Joined: Oct. 25, 2003

thanks

~*UK***~

Forum jump: