New posts

2021 - Full Suspension Bike Thread

March 8, 2021, 8:40 p.m.
Posts: 1260
Joined: Nov. 21, 2002

This is my big bike for 2021, will serve 3-5 days park duty as well. The cockpit geo feels very normal, I guess it took the industry about 4 years to catch up with Pole's progressive geo back in 2017. 

140mm rear with 140mm front right now, though I'll bump that up to 160mm for park days. It pedals better than the V1 Sentinel I was on last year, excited to get this beast on some proper trails for a shakedown run

March 8, 2021, 9:07 p.m.
Posts: 2322
Joined: April 25, 2003

Holy hell that bike and that pic make that Kia look tiny!

March 8, 2021, 9:43 p.m.
Posts: 4905
Joined: July 9, 2004

No doubt! 

You need a “wide load” sign on the back to drive on city streets. 

Nice looking machine by the way

March 8, 2021, 9:51 p.m.
Posts: 478
Joined: April 15, 2017

So many stunning builds here

March 10, 2021, 5:14 p.m.
Posts: 1260
Joined: Nov. 21, 2002

Posted by: Poz

No doubt! 

You need a “wide load” sign on the back to drive on city streets. 

Nice looking machine by the way

I won't deny the bike is long, and my car is small, but this is mostly camera tricks. In real life either tire sticks about maybe 2" at most.

March 10, 2021, 5:20 p.m.
Posts: 2595
Joined: Nov. 23, 2002

Posted by: UFO

I won't deny the bike is long, and my car is small, but this is mostly camera tricks. In real life either tire sticks about maybe 2" at most.

If you're wanting to protect you location (obscured license plate) then you should also edit out the construction sign in the yard across the street.

March 22, 2021, 6:47 a.m.
Posts: 854
Joined: June 29, 2006


here is my fully ripened and nerded out build of a "Madonna RAAW".

There is not a single component left, that is "just" on there, apart from the pedals (wrong color, also blame COVID for the red fork lowers) and bar end caps.

Sorry for the shitty pics, more in my album.

Anyone up for a nerded out part-spec-list with some practical, yet arm-chair-engineer part reviews? =)

Tease: Textile spokes, Trickstuff brakes, special bottle, flexy bars.

 Last edited by: Znarf on March 22, 2021, 7:07 a.m., edited 1 time in total.
March 22, 2021, 11:29 a.m.
Posts: 2471
Joined: April 2, 2005

do tell more about those pi rope wheels, i‘m thinking of getting some too.

March 23, 2021, 1:03 a.m.
Posts: 854
Joined: June 29, 2006

I can absolutely recommend them so far. 

I have a full season on them with lots of rough trails, rocks, jumps, mud, dust, sun, rain, ice and even salt (I commute to the trails and the city puts LOADS of salt on the bike paths etc.). 

I haven't had to true them, care for them in any way. I weigh 76kg and don't regularly kill wheels, but a full season without any trueing or maintenance would be impressive for any regular wheelset on a 29er 170mm bike. If they last two seasons, they last longer than most of my alloy wheel sets with steel spokes. 


The PI-Rope weigh only 1550g in 29" with 30mm iw. (verified weight on my kitchen scale) 

That is a noticeable difference to the 1800g of my DT EX1501 30mm wheels. You can ride DD tires and it feels roughly the same as EXO, weight and acceleration wise. (rims are the same weight, spokes are a lot lighter compared to steel, some of it is rotating mass, without having to resort to less beefy rims)

Their best trait for me however is their ability to smooth out vibration and flex a little. They still feel precise enough to me, but they really have a little bit of give and wiggle and noticeably increase comfort and grip on rooty, rocky and rough trails, especially on the very (too) stiff rear end of my Madonna. They take a little bit of sting out of square edged hits and I even find that I don't pinch flat tires as much (or have less KLOOONNG sounds on the front wheel without an insert, when I land on a root). 

I don´t notice any negative effects on flat-out bermed trails, but I am neither super heavy nor do I like or require the stiffest bike / setup. I bet there are riders who prefer super precise / stiff wheels. 

They interface with tires every bit as good as a regular Newmen rim with 30mm inner width (most rims work great nowadays). 

One thing to pay attention - they come with a little bottle with fluid which is to be applied occasionally to the spokes for UV-protection. (which I'll do in the next days)

So far I haven't damaged a spoke. 

They are more expensive than a really good regular alloy wheel set, but much less expensive than high-end carbon wheels. 

But in my experience they offer a real benefit over carbon (enduro) wheels, because they are lighter than most AND more comfortable. 

I am curious how they will hold up over the course of a couple of years. My fear of the spokes magically disintegrating at the same time is almost non-existent now =)

March 23, 2021, 3:13 a.m.
Posts: 2471
Joined: April 2, 2005

do they come with spare spokes?

March 23, 2021, 4:47 a.m.
Posts: 854
Joined: June 29, 2006

yes, one spare spoke. I don't know how tricky fitting one is, because they need to be stretched a bit. PI-Rope offer a quick and easy direct customer support though. Haven't needed it yet, but they are very quick and friendly with emails!

March 23, 2021, 6:04 a.m.
Posts: 2471
Joined: April 2, 2005

is there anything special about the hubs/rims, i.e. could the spokes also be used with different parts than the one offered?

ok scratch that, just read their faq. they are different. but i just found out the new bikeshop i‘m starting at next week is an official dealer <3

 Last edited by: Sethimus on March 23, 2021, 6:08 a.m., edited 3 times in total.
March 24, 2021, 11:28 a.m.
Posts: 936
Joined: Nov. 18, 2015

This could be the time for a new FS bike for me too.

Im loving my Naked HT and over the past 12months its seen 95% of my use instead of my previous generation Slayer (and 100% in the last 6mos since my son took my Slayer over completely -hopefully his new bike comes in soon so I can get mine back).

Not in a rush for a new and somewhat unnecessary FS because my Slayer is still awesome, and perhaps I will change my mind once I actually get to ride it again, but a couple things have got me thinking about a new FS: going back to 29r for the FS (I love my E29 before the Slayer) and the new bikes seem to have taken confidence inspiring to a new level.

My riding has changed since Im now on the HT all the time. Not doing the gnarly lines so much on it but I am loving rides like Dales and Forever After and Lower S&M and middle Sex Girl and the other techy blacks....thats the type of riding I love. BUT when you stop riding gnarly stuff its uncomfortable to go back to steeper moves.

Some bikes are catching my eye: Specialized Enduro, Chilcotin, new Slayer, Dreadnaught....maybe Altitude...I love the boutique like bikes (like my HT) and would think about going that route for a FS too as I think that if you feel that your bike is "special", that you avoid the new bike rat race more so than otherwise.

But maybe Im just daydreaming because I havent ridden my FS in months! 2 weeks till kids Slayer arrives.

 Last edited by: Ddean on March 24, 2021, 11:29 a.m., edited 1 time in total.
March 24, 2021, 5:43 p.m.
Posts: 936
Joined: Nov. 18, 2015

Posted by: Znarf


here is my fully ripened and nerded out build of a "Madonna RAAW".

There is not a single component left, that is "just" on there, apart from the pedals (wrong color, also blame COVID for the red fork lowers) and bar end caps.

Sorry for the shitty pics, more in my album.

Anyone up for a nerded out part-spec-list with some practical, yet arm-chair-engineer part reviews? =)

Tease: Textile spokes, Trickstuff brakes, special bottle, flexy bars.

I love that RAAW Madonna V2. Tell us more about it!!!!

EDIT: I had to come back and check this page to see if you had replied Im so interested in your bike. What a ride. Im puttin it on my list!

 Last edited by: Ddean on March 24, 2021, 10:30 p.m., edited 1 time in total.
March 25, 2021, 6:37 a.m.
Posts: 854
Joined: June 29, 2006

Well with that great of an encouragement, I am more than happy to oblige with a lengthy sort-of-review. (sorry for errors - I am not a native English speaker)

I absolutely love the Madonna! I owned a lot of nice bikes over the last fifteen years, but the Madonna is the best one so far.

The standout feature is the perfectly balanced geometry (front and rear centre).

At 6ft with 35.5“ inseam and apish arms I struggled with bike fit and finding the sweet spot with body position. Lots of tinkering with bar height, suspension setup,

you know the drill. Once I hopped on the Madonna, it just felt perfect and I have stopped wondering if there was a way to change this or that.

The Madonna is a bit different (and the Geometron fans will agree) in regards of chainstay length, stack height, seat angle. It is longer in the rear and has size specific chainstays, it has a tall stack height and a steep (although not TOO steep) actual seattube angle. It feels different than old-school bikes.

Cornering on this bike is next level. It is incredibly balanced/neutral and the sweet spot is bigger than on long bikes with short rear ends or short bikes.

You have to lean the bike instead of steering with the handlebars. Once I adjusted to that, things got better and better.

I have been riding since the late 90s and taking skill clinics now and then and while I am not a bad rider, I am not one of the natural really fast riders who are comfortable, confident and ripping any time on any bike and in any conditions. Little things sometimes throw off my confidence and flow to some extent. I do not rip on a sub par bike, my joints start acting up and I start to find excuses ;-)

I am fit climbing though.

The Madonna just absolutely boosts my confidence. It climbs great and is super comfortable, even though it is not light, but no part of my body cramps or hurts, even on long rides, NO back pain. I try features and jumps I never attempted before and have more fun at 37 on a bike than at 17. I started to learn new tricks and I attribute that to the fact, that the bike just fits like a glove and I feel great on it because of that.

For sure not only the geometry, but also the suspension helps with the confidence. It works fantastic. It is very sensitive so there is a little movement when your body weight moves. But it is also really offering great traction. There is good support through the stroke and ramp up is just right. If you are heavy, they offer a different rocker with lower ratio. For my 76kg the stock link is perfect. Headtube angle is perfect. I’ve tried different shocks (X2 Float, Super Deluxe Coil) but the DPX2 is my pick. It just works fantastic and the three modes help with climbing and traverses on flatter terrain.

The bike works on flowy and flat trails, but it is made for gnarly stuff. I got a slightly used 150/140 (Orbea Occam Carbon, nice and light build) 29er trail bike as a backup a couple of weeks ago, but honestly after the first couple of rides, I do not see myself riding it much. I will just grab the Madonna. It is not as snappy, but the difference in climbing efficiency is much smaller than I anticipated and I enjoy the long travel much more for the rest of the ride.

It is like everything is covered in fat powder like snow, the travel just takes the edge off and makes me feel like a better rider :)

Apart from all that, there is another aspect which I actually enjoy almost as much as the exceptional feel on the trail:

It is overbuilt and nothin is flimsy. It feels like it is built to take all the stuff a mountain bike should. Not just while riding but also loading it on/in a car, storing it in the basement, crashing it, just wiping all that mud or dust off and not babying it. There is a matte clear powder coat over the brushed finish, which looks perfect after two seasons. All frame areas (heel rub etc., cable rub, chain slap) are prepared and made with real world conditions in mind - straight from the factory. You don’t need to figure out frame protection and all that after your first rides. 

All bearings are the same 25mm size, except at the main pivot, which are 52mm like in a headset. The shock is running on four 25mm bearings. That is around 500g of bearings alone, but going into the third season with lots of riding in all conditions, all year long (even in three weeks of snow past winter) the bearings are absolutely fine. I swapped two at the upper shock mount and one in the drive side Horst link last year, more or less in order to test my bearing press. They were a bit rougher, but still worked. That was like playing Lego. The bearings have additional sealed caps over them and after a full season there was NO dirt under these caps. Just fresh, white grease. I haven’t had that on any bike before. They are also designed without having to damage the frame while replacing, no special tools required. Which surprisingly isn’t the way with a lot of expensive bike frames in my experience. A punch and a press in ONE size is all you need. Even just soft hammering them in could work. (The big ones work with a headset press)

Servicing all the hardware is incredibly easy and there is no problem with tolerances, pressing steel bearings in carbon parts etc. They also offer every part as replacement directly in their web-shop. Full external cable routing, done a tidy way. I love it when wrenching and don’t mind it while riding.

Nothing is perfect, so what is not to like?

Honestly not much, if you accept that everything in life is a compromise ;-)

-It is heavy, even with a bling build. A little below 16kg with proper tires. Frame weight size Large with DPX2 shock and all hardware (axles, seat clamp etc.) is 4,5kg so around 600g more than a Santa Cruz Megatower CC of the same size

-It is not cheap

-It needs a beefy rear tire, which makes it even heavier (I rarely flat tires since going tubeless more than ten years ago, but I destroyed five EXO tires even WITH inserts and am now on DD and Tannus tubeless)

-It needs proper terrain and trails (while it is fun enough on the occasional mellow trail, if you only ride blue stuff, get something else)

-Cable routing for the brake is tidy but TIGHT around the BB with DUB bb-shells, with Shimano BB no issues

-rear end might be almost too stiff side to side for my 76kg (but is solved with my „flexy“ wheels)

-needs powerful brakes

Build kit:

Braking: Trickstuff Direttissima brakes (fantastic, little pad clearance, bit of rub sometimes, but high leverage, incredible modulation, control and longevity - my favorite part of the bike) with Magura MDR-C-E-bike-budget rotors (great! Cheap and lots of material, no chirping)

Drivetrain: XX1 11spd cassette and chain, 28t steel chainring, XT derailleur and SRAM 11spd shifter (works great with dedicated shifter clamps, direct mount adapters on the Direttissima are not ergonomic)

Suspension: Now a 180mm Lyrik Ultimate, works great, easy to set up and DPX2 - also works great, also easy to set up. Bike originally came with Fox 36, which I killed 4 CSUs, but Fox was good with warranty, I got tired of that any way.

Seatpost: Vecnum Nivo 212mm - works flawless without a service since my first ride, 200g less than a One-Up V2 210mm post. Really good!

Wheels: PI-Rope, Vectran (textile spokes), Newmen hubs and rims. Really nice, no issues at all 1550g

Tires: DHF WT Maxxterra EXO or Conti der Baron 2.4 Protection on the front / DHR2 2.3 / Dissector 2.4 or something else on the rear, still struggling to find the perfect rear tire…

Cockpit: Syntace 20mm rise carbon bars with 31,8mm high-flex design, 40mm Syntace stem (my go to combination, works and lasts perfectly)

Saddle: SQLab 611 seat - fits my bum perfectly

Headset: Acros - comes with the frame, lasts perfectly, didn’t have to touch it once

Grips: ESI FIT XC (work for me)

Tubeless Valves: e13 - expensive, but don’t clog up all the time

Edit: Wow, this got TOO long.

 Last edited by: Znarf on March 25, 2021, 8:50 a.m., edited 5 times in total.

Forum jump: