2016 SRAM X01 Trigger Shifter Assembly

My shifter stopped working and then I noticed the shifter assembly has come loose and not sure how to reassemble it, is someone able to help me out? Thanks in advance.

It is a 2016 SRAM X01 Right 11 Speed Trigger Shifter

-What are the two springs for shown in Picture 6 and where do they go?
-The little plate shown in pictures 4 and 5, which side is up? 'L' up or 'R' up?

Pictures of the shifter here:
Picture 1: Trigger assembly https://www.dropbox.com/s/nmh0q0vv50qbzo9/16776890_1404322769619611_615939674_o.jpg?dl=0
Picture 2: Top assembly top side https://www.dropbox.com/s/7wghi5hi4u1bpud/16833006_1404322806286274_681514256_o.jpg?dl=0
Picture 3: Bottom Side of top assembly https://www.dropbox.com/s/qqnhpkpkk9kjuev/16832764_1404322789619609_1156416458_o.jpg?dl=0
Picture 4: Plate 'R' https://www.dropbox.com/s/1rzax1kkrbni4wq/16810855_1404322732952948_526962444_o.jpg?dl=0
Picture 5: Plate 'L' Side https://www.dropbox.com/s/ithpxxnsgcjvsr4/16833595_1404322722952949_352701176_o.jpg?dl=0
Picture 6: Two Springs https://www.dropbox.com/s/bgu082w5urgc12p/16832911_1404322752952946_40157871_o.jpg?dl=0

Cheers

Forgot to take a picture of the little 'Y' bracket as well, but I found where that goes. There is a little slot for the small spring to go in, and the other end of it pushes onto the Y bracket and the plate goes over top, R side up.

Only thing I do not know is where the bigger spring goes, anyone?

Thanks

I accidentally took the wrong side off my X01 shifter a couple months ago. It took me more than an hour to get it back together, so stressful! Dropbox isn't working for me right now but I assume it's the same problem. Good luck!

Got into the Dropbox and, yep, same thing that I did. You could actually hear the sound of angels rejoicing when we got it back together (I enlisted help, two brains worked better than one!).

Are you able to point me as to where the spring on the right in photo #6 goes?

I have rebuilt older X9 and X7 shifter so I have a good idea of how these work, but I can't seem to find a place for that spring??? agh!

No, sorry, I don't even recognize it. But if you can get the shifter back together without it, you should be able to figure out which function is not working without it in there.

Well, after playing with it for way too long I finally figured it out, so I took some photos to help other people if this happens.]