I have a size 2 Shredd-Doggg that I ended up mulletizing and discovered a secret to longer dropper posts on these: don't use the prescribed housing route. The limiting factor is the lower pivot, and you can route the housing into the frame through the same slot the derailleur housing goes into (it's totally open in there, with a nice curved path for the housing to go under the main pivot and up to the dropper actuator.) I've got a BikeYoke 213mm in there with 3cm under the seal head.
I'd go longer if BikeYoke made a 240 for 30.9mm tubes (but fully understand their reasoning for not going longer until the frame is 34.9.) If I want less drop I can just stop it short, but if I want more drop.....well, that's the harder direction.
May 16, 2022, 3:51 p.m. - Devin Zoller
 I have a size 2 Shredd-Doggg that I ended up mulletizing and discovered a secret to longer dropper posts on these: don't use the prescribed housing route. The limiting factor is the lower pivot, and you can route the housing into the frame through the same slot the derailleur housing goes into (it's totally open in there, with a nice curved path for the housing to go under the main pivot and up to the dropper actuator.) I've got a BikeYoke 213mm in there with 3cm under the seal head. I'd go longer if BikeYoke made a 240 for 30.9mm tubes (but fully understand their reasoning for not going longer until the frame is 34.9.) If I want less drop I can just stop it short, but if I want more drop.....well, that's the harder direction.