These instructions are at odds with Shimano's, described on page 30, here: [https://si.shimano.com/api/publish/storage/pdf/en/dm/MARD001/DM-MARD001-03-ENG.pdf](https://si.shimano.com/api/publish/storage/pdf/en/dm/MARD001/DM-MARD001-03-ENG.pdf)
The 3.5–5.4Nm (which is mentioned, but I believe during the wrong step) is the target for clutch resistance when adjusting the cam-squeezing bolt. This is the only place I feel a torque wrench is NEEDED.
In the step where the 3.5–5.4Nm range is mentioned , the specified torque is 7.8-9.8Nm (page 36).
March 3, 2021, 8:46 a.m. - Tim Lane
These instructions are at odds with Shimano's, described on page 30, here: [https://si.shimano.com/api/publish/storage/pdf/en/dm/MARD001/DM-MARD001-03-ENG.pdf](https://si.shimano.com/api/publish/storage/pdf/en/dm/MARD001/DM-MARD001-03-ENG.pdf) The 3.5–5.4Nm (which is mentioned, but I believe during the wrong step) is the target for clutch resistance when adjusting the cam-squeezing bolt. This is the only place I feel a torque wrench is NEEDED. In the step where the 3.5–5.4Nm range is mentioned , the specified torque is 7.8-9.8Nm (page 36).