#!markdown
Hi KurtM, you definitely want to pull off the air cans as shown and inspect
the seals/o-rings.
Your issue could definitely be a lack of lubrication; it could also be that
something was pinched from the factory assembly.
If the o-rings all look good lube them up and ride. If any are suspect an air
sleeve service kit is not expensive (may be worth doing just for peace of
mind).
While you're in there consider trying a couple volume spacers for a more
progressive end stroke (I believe there are none stock on your Devinci).
Thanks for reading!
June 27, 2016, 9:07 a.m. - DrewM
#!markdown Hi KurtM, you definitely want to pull off the air cans as shown and inspect the seals/o-rings. Your issue could definitely be a lack of lubrication; it could also be that something was pinched from the factory assembly. If the o-rings all look good lube them up and ride. If any are suspect an air sleeve service kit is not expensive (may be worth doing just for peace of mind). While you're in there consider trying a couple volume spacers for a more progressive end stroke (I believe there are none stock on your Devinci). Thanks for reading!